dmesg - 16384 MB DDR4-2133MHz
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.14.32-xxxx-grs-ipv6-64 (kernel@kernel.ovh.net) (gcc version 4.9.2 (Debian 4.9.2-10) ) #9 SMP Thu Oct 20 14:53:52 CEST 2016
Command line: BOOT_IMAGE=/boot/bzImage-3.14.32-xxxx-grs-ipv6-64 root=/dev/md1 ro net.ifnames=0
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000098bff] usable
BIOS-e820: [mem 0x0000000000098c00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000781cafff] usable
BIOS-e820: [mem 0x00000000781cb000-0x00000000781cbfff] ACPI NVS
BIOS-e820: [mem 0x00000000781cc000-0x0000000078215fff] reserved
BIOS-e820: [mem 0x0000000078216000-0x0000000078284fff] usable
BIOS-e820: [mem 0x0000000078285000-0x0000000079ec5fff] reserved
BIOS-e820: [mem 0x0000000079ec6000-0x0000000079f99fff] ACPI NVS
BIOS-e820: [mem 0x0000000079f9a000-0x0000000079fecfff] ACPI data
BIOS-e820: [mem 0x0000000079fed000-0x0000000079ffffff] usable
BIOS-e820: [mem 0x000000007a000000-0x000000007bffffff] reserved
BIOS-e820: [mem 0x0000000080000000-0x0000000085ffffff] reserved
BIOS-e820: [mem 0x0000000088000000-0x00000000880fffff] reserved
BIOS-e820: [mem 0x000000008a000000-0x000000008e7fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fd000000-0x00000000fe7fffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff400000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000008717fffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Intel Corporation S1200SP/S1200SP, BIOS S1200SP.86B.01.02.0001.111120150000 11/11/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x871800 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00C0000000 mask 7FC0000000 uncachable
1 base 00A0000000 mask 7FE0000000 uncachable
2 base 0090000000 mask 7FF0000000 uncachable
3 base 008C000000 mask 7FFC000000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0x7a000 max_arch_pfn = 0x400000000
Base memory trampoline at [ffff880000092000] 92000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x02d6d000, 0x02d6dfff] PGTABLE
init_memory_mapping: [mem 0x871600000-0x8717fffff]
[mem 0x871600000-0x8717fffff] page 2M
BRK [0x02d6e000, 0x02d6efff] PGTABLE
init_memory_mapping: [mem 0x870000000-0x8715fffff]
[mem 0x870000000-0x8715fffff] page 2M
init_memory_mapping: [mem 0x800000000-0x86fffffff]
[mem 0x800000000-0x83fffffff] page 1G
[mem 0x840000000-0x86fffffff] page 2M
init_memory_mapping: [mem 0x00100000-0x781cafff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x77ffffff] page 2M
[mem 0x78000000-0x781cafff] page 4k
init_memory_mapping: [mem 0x78216000-0x78284fff]
[mem 0x78216000-0x78284fff] page 4k
BRK [0x02d6f000, 0x02d6ffff] PGTABLE
init_memory_mapping: [mem 0x79fed000-0x79ffffff]
[mem 0x79fed000-0x79ffffff] page 4k
BRK [0x02d70000, 0x02d70fff] PGTABLE
init_memory_mapping: [mem 0x100000000-0x7ffffffff]
[mem 0x100000000-0x7ffffffff] page 1G
ACPI: RSDP 00000000000f0540 000024 (v02 INTEL )
ACPI: XSDT 0000000079fa4188 0000EC (v01 INTEL S1200SPL 00000000 INTL 01000013)
ACPI: FACP 0000000079fe4000 0000F4 (v05 INTEL S1200SPL 00000000 INTL 20091013)
ACPI: DSDT 0000000079fb2000 029296 (v02 INTEL S1200SPL 00000000 INTL 20091013)
ACPI: FACS 0000000079f7f000 000040
ACPI: HPET 0000000079fe3000 000038 (v01 INTEL S1200SPL 00000001 INTL 20091013)
ACPI: LPIT 0000000079fe2000 000094 (v01 INTEL S1200SPL 00000000 INTL 20091013)
ACPI: APIC 0000000079fe1000 0000BC (v03 INTEL S1200SPL 00000001 INTL 20091013)
ACPI: MCFG 0000000079fe0000 00003C (v01 INTEL S1200SPL 00000001 INTL 20091013)
ACPI: SPMI 0000000079fde000 000042 (v05 INTEL S1200SPL 00000000 INTL 20091013)
ACPI: WDAT 0000000079fdd000 000134 (v01 INTEL S1200SPL 00000000 INTL 20091013)
ACPI: WDDT 0000000079fdc000 000040 (v01 INTEL S1200SPL 00000000 INTL 20091013)
ACPI: SSDT 0000000079faf000 002BAE (v02 INTEL S1200SPL 00001000 INTL 20091013)
ACPI: SSDT 0000000079fae000 000BE3 (v02 INTEL S1200SPL 00001000 INTL 20091013)
ACPI: SSDT 0000000079fad000 00019A (v02 INTEL S1200SPL 00001000 INTL 20091013)
ACPI: SSDT 0000000079fac000 0004A3 (v02 INTEL S1200SPL 00001000 INTL 20091013)
ACPI: SSDT 0000000079fe5000 005328 (v02 INTEL S1200SPL 00003000 INTL 20141107)
ACPI: DBGP 0000000079fab000 000034 (v01 INTEL S1200SPL 00000000 INTL 20091013)
ACPI: SSDT 0000000079fa9000 000E58 (v02 INTEL S1200SPL 00003000 INTL 20141107)
ACPI: SSDT 0000000079fa7000 000064 (v02 INTEL S1200SPL 00000002 INTL 20141107)
ACPI: DMAR 0000000079fa5000 000114 (v01 INTEL S1200SPL 00000001 INTL 00000001)
ACPI: HEST 0000000079feb000 0000A8 (v01 INTEL S1200SPL 00000001 INTL 00000001)
ACPI: ERST 0000000079fa2000 000230 (v01 INTEL S1200SPL 00000001 INTL 00000001)
ACPI: DBG2 0000000079faa000 000054 (v00 INTEL S1200SPL 00000000 INTL 20091013)
ACPI: PRAD 0000000079fa6000 000102 (v02 INTEL S1200SPL 00000002 INTL 20141107)
ACPI: BERT 0000000079fa3000 000030 (v01 INTEL S1200SPL 00000001 INTL 00000001)
ACPI: SSDT 0000000079fa8000 000B79 (v02 INTEL S1200SPL 00000002 INTL 20141107)
ACPI: EINJ 0000000079fa1000 000130 (v01 INTEL S1200SPL 00000001 INTL 00000001)
ACPI: SPCR 0000000079fdf000 000050 (v01 INTEL S1200SPL 00000000 INTL 20091013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000008717fffff]
Initmem setup node 0 [mem 0x00000000-0x8717fffff]
NODE_DATA [mem 0x8717fb000-0x8717fefff]
[ffffea0000000000-ffffea0021dfffff] PMD -> [ffff880851000000-ffff880870dfffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x8717fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x00097fff]
node 0: [mem 0x00100000-0x781cafff]
node 0: [mem 0x78216000-0x78284fff]
node 0: [mem 0x79fed000-0x79ffffff]
node 0: [mem 0x100000000-0x8717fffff]
On node 0 totalpages: 8296932
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3991 pages, LIFO batch:0
DMA32 zone: 7626 pages used for memmap
DMA32 zone: 488013 pages, LIFO batch:31
Normal zone: 121952 pages used for memmap
Normal zone: 7804928 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 136
e820: [mem 0x8e800000-0xdfffffff] available for PCI devices
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 20 pages/cpu @ffff880871400000 s60288 r0 d21632 u262144
pcpu-alloc: s60288 r0 d21632 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8167269
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/boot/bzImage-3.14.32-xxxx-grs-ipv6-64 root=/dev/md1 ro net.ifnames=0
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x1f, cntxt size 0x440
Checking aperture...
No AGP bridge found
Memory: 32568288K/33187728K available (15425K kernel code, 5412K rwdata, 6720K rodata, 1068K init, 1404K bss, 619440K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS:33024 nr_irqs:2048 16
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 133693440 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration failed
tsc: Unable to calibrate against PIT
tsc: using HPET reference calibration
tsc: Detected 3504.317 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7008.63 BogoMIPS (lpj=14017268)
pid_max: default: 32768 minimum: 501
ACPI: Core revision 20131218
ACPI: All ACPI Tables successfully acquired
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
PAX: PCID detected
PAX: INVPCID detected
mce: CPU supports 10 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 52K (ffffffff82c00000 - ffffffff82c0d000)
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Xeon(R) CPU E3-1245 v5 @ 3.50GHz (fam: 06, model: 5e, stepping: 03)
TSC deadline timer enabled
Performance Events: no PEBS fmt3+, generic architected perfmon, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
PAX: PCID detected
PAX: INVPCID detected
#2
PAX: PCID detected
PAX: INVPCID detected
#3
PAX: PCID detected
PAX: INVPCID detected
#4
PAX: PCID detected
PAX: INVPCID detected
#5
PAX: PCID detected
PAX: INVPCID detected
#6
PAX: PCID detected
PAX: INVPCID detected
#7
PAX: PCID detected
PAX: INVPCID detected
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (56069.07 BogoMIPS)
devtmpfs: initialized
xor: automatically using best checksumming function:
avx : 28212.000 MB/sec
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
dca service started, version 1.12.1
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
raid6: sse2x1 12337 MB/s
raid6: sse2x2 15182 MB/s
raid6: sse2x4 15958 MB/s
raid6: avx2x1 24633 MB/s
raid6: avx2x2 27873 MB/s
raid6: avx2x4 31176 MB/s
raid6: using algorithm avx2x4 (31176 MB/s)
raid6: using avx2x2 recovery algorithm
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 20 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: PRAD (nil) 000102 (v02 INTEL S1200SPL 00000002 INTL 20141107)
ACPI: SSDT 0000000079e59c18 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20141107)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (nil) 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20141107)
ACPI: SSDT 0000000079e5a898 0006ED (v02 PmRef Cpu0Ist 00003000 INTL 20141107)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (nil) 0006ED (v02 PmRef Cpu0Ist 00003000 INTL 20141107)
ACPI: SSDT 0000000079e59618 0005AA (v02 PmRef ApIst 00003000 INTL 20141107)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (nil) 0005AA (v02 PmRef ApIst 00003000 INTL 20141107)
ACPI: SSDT 0000000079e58d98 000119 (v02 PmRef ApCst 00003000 INTL 20141107)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (nil) 000119 (v02 PmRef ApCst 00003000 INTL 20141107)
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [WRST] (off)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x8e800000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff]
pci 0000:00:00.0: [8086:1918] type 00 class 0x060000
pci 0000:00:02.0: [8086:191d] type 00 class 0x038000
pci 0000:00:02.0: reg 0x10: [mem 0xa1000000-0xa1ffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f]
pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xa2d00000-0xa2d0ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
pci 0000:00:14.2: reg 0x10: [mem 0xa2d16000-0xa2d16fff 64bit]
pci 0000:00:15.0: [8086:a160] type 00 class 0x118000
pci 0000:00:15.0: reg 0x10: [mem 0xa2d17000-0xa2d17fff 64bit]
pci 0000:00:15.1: [8086:a161] type 00 class 0x118000
pci 0000:00:15.1: reg 0x10: [mem 0xa2d18000-0xa2d18fff 64bit]
pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xa2d1c000-0xa2d1cfff 64bit]
pci 0000:00:16.0: PME# supported from D3hot
pci 0000:00:16.1: [8086:a13b] type 00 class 0x078000
pci 0000:00:16.1: reg 0x10: [mem 0xa2d1b000-0xa2d1bfff 64bit]
pci 0000:00:16.1: PME# supported from D3hot
pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
pci 0000:00:17.0: reg 0x10: [mem 0xa2d14000-0xa2d15fff]
pci 0000:00:17.0: reg 0x14: [mem 0xa2d1e000-0xa2d1e0ff]
pci 0000:00:17.0: reg 0x18: [io 0x5080-0x5087]
pci 0000:00:17.0: reg 0x1c: [io 0x5088-0x508b]
pci 0000:00:17.0: reg 0x20: [io 0x5060-0x507f]
pci 0000:00:17.0: reg 0x24: [mem 0xa2d1d000-0xa2d1d7ff]
pci 0000:00:17.0: PME# supported from D3hot
pci 0000:00:1d.0: [8086:a119] type 01 class 0x060400
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.2: [8086:a11a] type 01 class 0x060400
pci 0000:00:1d.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.3: [8086:a11b] type 01 class 0x060400
pci 0000:00:1d.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:a127] type 00 class 0x118000
pci 0000:00:1e.0: reg 0x10: [mem 0xa2d19000-0xa2d19fff 64bit]
pci 0000:00:1f.0: [8086:a149] type 00 class 0x060100
pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
pci 0000:00:1f.2: reg 0x10: [mem 0xa2d10000-0xa2d13fff]
pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
pci 0000:00:1f.4: reg 0x10: [mem 0xa2d1a000-0xa2d1a0ff 64bit]
pci 0000:00:1f.4: reg 0x20: [io 0x5040-0x505f]
pci 0000:01:00.0: [102b:0522] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xa0000000-0xa0ffffff pref]
pci 0000:01:00.0: reg 0x14: [mem 0xa2800000-0xa2803fff]
pci 0000:01:00.0: reg 0x18: [mem 0xa2000000-0xa27fffff]
pci 0000:01:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
pci 0000:00:1d.0: PCI bridge to [bus 01]
pci 0000:00:1d.0: bridge window [mem 0xa2000000-0xa28fffff]
pci 0000:00:1d.0: bridge window [mem 0xa0000000-0xa0ffffff 64bit pref]
pci 0000:02:00.0: [8086:1533] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [mem 0xa2b00000-0xa2bfffff]
pci 0000:02:00.0: reg 0x18: [io 0x4000-0x401f]
pci 0000:02:00.0: reg 0x1c: [mem 0xa2c00000-0xa2c03fff]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.2: PCI bridge to [bus 02]
pci 0000:00:1d.2: bridge window [io 0x4000-0x4fff]
pci 0000:00:1d.2: bridge window [mem 0xa2b00000-0xa2cfffff]
pci 0000:03:00.0: [8086:1533] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [mem 0xa2900000-0xa29fffff]
pci 0000:03:00.0: reg 0x18: [io 0x3000-0x301f]
pci 0000:03:00.0: reg 0x1c: [mem 0xa2a00000-0xa2a03fff]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.3: PCI bridge to [bus 03]
pci 0000:00:1d.3: bridge window [io 0x3000-0x3fff]
pci 0000:00:1d.3: bridge window [mem 0xa2900000-0xa2afffff]
acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: Enabled 7 GPEs in block 00 to 7F
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
wmi: Mapper loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00098c00-0x0009ffff]
e820: reserve RAM buffer [mem 0x781cb000-0x7bffffff]
e820: reserve RAM buffer [mem 0x78285000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7a000000-0x7bffffff]
e820: reserve RAM buffer [mem 0x871800000-0x873ffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 24.000000 MHz counter
Switched to clocksource hpet
FS-Cache: Loaded
CacheFiles: Loaded
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfd000000-0xfdabffff] has been reserved
system 00:00: [mem 0xfdad0000-0xfdadffff] has been reserved
system 00:00: [mem 0xfdb00000-0xfdffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfe01ffff] has been reserved
system 00:00: [mem 0xfe036000-0xfe03bfff] has been reserved
system 00:00: [mem 0xfe03d000-0xfe3fffff] has been reserved
system 00:00: [mem 0xfe410000-0xfe7fffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0x2000-0x20fe] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:05: [io 0x0680-0x069f] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0x1800-0x18fe] could not be reserved
system 00:05: [io 0x164e-0x164f] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [io 0x0800-0x087f] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:08: [io 0x1854-0x1857] has been reserved
system 00:08: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: Plug and Play ACPI device, IDs INT345d (active)
system 00:0c: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0c: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:0c: [mem 0xfed45000-0xfed8ffff] could not be reserved
system 00:0c: [mem 0xff000000-0xffffffff] could not be reserved
system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0c: [mem 0x8e800000-0x8e81ffff] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 13 devices
ACPI: bus type PNP unregistered
pci 0000:01:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
pci 0000:01:00.0: BAR 6: assigned [mem 0xa2810000-0xa281ffff pref]
pci 0000:00:1d.0: PCI bridge to [bus 01]
pci 0000:00:1d.0: bridge window [mem 0xa2000000-0xa28fffff]
pci 0000:00:1d.0: bridge window [mem 0xa0000000-0xa0ffffff 64bit pref]
pci 0000:00:1d.2: PCI bridge to [bus 02]
pci 0000:00:1d.2: bridge window [io 0x4000-0x4fff]
pci 0000:00:1d.2: bridge window [mem 0xa2b00000-0xa2cfffff]
pci 0000:00:1d.3: PCI bridge to [bus 03]
pci 0000:00:1d.3: bridge window [io 0x3000-0x3fff]
pci 0000:00:1d.3: bridge window [mem 0xa2900000-0xa2afffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x8e800000-0xdfffffff]
pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff]
pci_bus 0000:01: resource 1 [mem 0xa2000000-0xa28fffff]
pci_bus 0000:01: resource 2 [mem 0xa0000000-0xa0ffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:02: resource 1 [mem 0xa2b00000-0xa2cfffff]
pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:03: resource 1 [mem 0xa2900000-0xa2afffff]
NET: Registered protocol family 2
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP: reno registered
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:01:00.0: Boot video device
PCI: CLS 128 bytes, default 64
dmar: Host address width 39
dmar: DRHD base: 0x000000fed90000 flags: 0x0
dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0501e
dmar: DRHD base: 0x000000fed91000 flags: 0x1
dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
dmar: RMRR base: 0x0000003e2e0000 end: 0x0000003e2fffff
dmar: RMRR base: 0x0000008c000000 end: 0x0000008e7fffff
dmar: Unknown DMAR structure type 4
dmar: Unknown DMAR structure type 4
dmar: Unknown DMAR structure type 4
DMAR: No ATSR found
IOMMU 0 0xfed90000: using Queued invalidation
IOMMU 1 0xfed91000: using Queued invalidation
IOMMU: Setting RMRR:
IOMMU: Setting identity map for device 0000:00:02.0 [0x8c000000 - 0x8e7fffff]
IOMMU: Setting identity map for device 0000:00:14.0 [0x3e2e0000 - 0x3e2fffff]
IOMMU: Prepare 0-16MiB unity mapping for LPC
IOMMU: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff]
PCI-DMA: Intel(R) Virtualization Technology for Directed I/O
kvm: already loaded the other module
microcode: CPU0 sig=0x506e3, pf=0x2, revision=0x49
microcode: CPU1 sig=0x506e3, pf=0x2, revision=0x49
microcode: CPU2 sig=0x506e3, pf=0x2, revision=0x49
microcode: CPU3 sig=0x506e3, pf=0x2, revision=0x49
microcode: CPU4 sig=0x506e3, pf=0x2, revision=0x49
microcode: CPU5 sig=0x506e3, pf=0x2, revision=0x49
microcode: CPU6 sig=0x506e3, pf=0x2, revision=0x49
microcode: CPU7 sig=0x506e3, pf=0x2, revision=0x49
microcode: Microcode Update Driver: v2.00 , Peter Oruba
AVX2 version of gcm_enc/dec engaged.
sha1_ssse3: Using AVX optimized SHA-1 implementation
futex hash table entries: 2048 (order: 5, 131072 bytes)
bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
DLM installed
FS-Cache: Netfs 'nfs' registered for caching
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Key type cifs.spnego registered
NTFS driver 2.1.30 [Flags: R/W].
ROMFS MTD (C) 2007 Red Hat, Inc.
fuse init (API version 7.22)
JFS: nTxBlock = 8192, nTxLock = 65536
SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
ocfs2: Registered cluster interface o2cb
ocfs2: Registered cluster interface user
OCFS2 User DLM kernel interface loaded
GFS2 installed
FS-Cache: Netfs 'ceph' registered for caching
ceph: loaded (mds proto 32)
msgmni has been set to 32768
async_tx: api initialized (async)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1d.0: irq 138 for MSI/MSI-X
pcieport 0000:00:1d.2: irq 139 for MSI/MSI-X
pcieport 0000:00:1d.3: irq 140 for MSI/MSI-X
aer 0000:00:1d.0:pcie02: service driver aer loaded
aer 0000:00:1d.2:pcie02: service driver aer loaded
aer 0000:00:1d.3:pcie02: service driver aer loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 94
ipmi message handler version 39.2
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
ACPI: acpi_idle registered with cpuidle
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
ERST: Error Record Serialization Table (ERST) support is initialized.
pstore: Registered erst as persistent store backend
ghes_edac: This EDAC driver relies on BIOS to enumerate memory and get error reports.
ghes_edac: Unfortunately, not all BIOSes reflect the memory layout correctly.
ghes_edac: So, the end result of using this driver varies from vendor to vendor.
ghes_edac: If you find incorrect reports, please contact your hardware vendor
ghes_edac: to correct its BIOS.
ghes_edac: This system has 4 DIMM sockets.
EDAC MC0: Giving out device to module ghes_edac.c controller ghes_edac: DEV ghes (INTERRUPT)
EDAC MC1: Giving out device to module ghes_edac.c controller ghes_edac: DEV ghes (INTERRUPT)
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
ioatdma: Intel(R) QuickData Technology Driver 4.00
00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
nbd: registered device at major 43
drbd: initialized. Version: 8.4.3 (api:1/proto:86-101)
drbd: built-in
drbd: registered as block device major 147
rbd: loaded
Uniform Multi-Platform E-IDE driver
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
Probing IDE interface ide0...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
tsc: Refined TSC clocksource calibration: 3504.004 MHz
ide1 at 0x170-0x177,0x376 on irq 15
ide-gd driver 1.18
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 06.700.06.00-rc1 Sat. Aug. 31 17:00:00 PDT 2013
mpt2sas version 16.100.00.00 loaded
mpt3sas version 02.100.00.00 loaded
3ware Storage Controller device driver for Linux v1.26.02.003.
3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
VMware PVSCSI driver - version 1.0.2.0-k
ahci 0000:00:17.0: version 3.0
ahci 0000:00:17.0: irq 141 for MSI/MSI-X
ahci 0000:00:17.0: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0xff impl SATA mode
ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
ata1: SATA max UDMA/133 abar m2048@0xa2d1d000 port 0xa2d1d100 irq 141
ata2: SATA max UDMA/133 abar m2048@0xa2d1d000 port 0xa2d1d180 irq 141
ata3: SATA max UDMA/133 abar m2048@0xa2d1d000 port 0xa2d1d200 irq 141
ata4: SATA max UDMA/133 abar m2048@0xa2d1d000 port 0xa2d1d280 irq 141
ata5: SATA max UDMA/133 abar m2048@0xa2d1d000 port 0xa2d1d300 irq 141
ata6: SATA max UDMA/133 abar m2048@0xa2d1d000 port 0xa2d1d380 irq 141
ata7: SATA max UDMA/133 abar m2048@0xa2d1d000 port 0xa2d1d400 irq 141
ata8: SATA max UDMA/133 abar m2048@0xa2d1d000 port 0xa2d1d480 irq 141
slram: not enough parameters.
bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.78.17-0 (2013/04/11)
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.4.2-NAPI
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
igb: Copyright (c) 2007-2013 Intel Corporation.
igb 0000:02:00.0: irq 142 for MSI/MSI-X
igb 0000:02:00.0: irq 143 for MSI/MSI-X
igb 0000:02:00.0: irq 144 for MSI/MSI-X
igb 0000:02:00.0: irq 145 for MSI/MSI-X
igb 0000:02:00.0: irq 146 for MSI/MSI-X
igb 0000:02:00.0: PHY reset is blocked due to SOL/IDER session.
igb 0000:02:00.0: added PHC on eth0
igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:02:00.0: eth0: (PCIe:2.5Gb/s:Width x1) a4:bf:01:07:d6:d2
igb 0000:02:00.0: eth0: PBA No: 006200-000
igb 0000:02:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
igb 0000:03:00.0: irq 147 for MSI/MSI-X
igb 0000:03:00.0: irq 148 for MSI/MSI-X
igb 0000:03:00.0: irq 149 for MSI/MSI-X
igb 0000:03:00.0: irq 150 for MSI/MSI-X
igb 0000:03:00.0: irq 151 for MSI/MSI-X
igb 0000:03:00.0: PHY reset is blocked due to SOL/IDER session.
igb 0000:03:00.0: added PHC on eth1
igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:03:00.0: eth1: (PCIe:2.5Gb/s:Width x1) a4:bf:01:07:d6:d3
igb 0000:03:00.0: eth1: PBA No: 006200-000
igb 0000:03:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.0.2-k
igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
Intel(R) 10 Gigabit PCI Express Network Driver - version 4.3.15
Copyright (c) 1999-2015 Intel Corporation.
i40e: Intel(R) Ethernet Connection XL710 Network Driver - version 1.0.11-k
i40e: Copyright (c) 2013 - 2014 Intel Corporation.
ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
ixgb: Copyright (c) 1999-2008 Intel Corporation.
sky2: driver version 1.30
QLogic/NetXen Network Driver v4.0.82
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
VMware vmxnet3 virtual NIC driver - version 1.2.0.0-k-NAPI
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.20
Fusion MPT FC Host driver 3.04.20
Fusion MPT SAS Host driver 3.04.20
Fusion MPT misc device (ioctl) driver 3.04.20
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
VFIO - User Level meta-driver version: 0.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:14.0: cache line size of 128 is not supported
xhci_hcd 0000:00:14.0: irq 152 for MSI/MSI-X
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 16 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
usbcore: registered new interface driver pl2303
i8042: PNP: No PS/2 controller found. Probing ports directly.
ata8: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ATA-9: INTEL SSDSC2BB480G6, G2010150, max UDMA/133
ata2.00: 937703088 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata1.00: ATA-9: INTEL SSDSC2BB480G6, G2010150, max UDMA/133
ata1.00: 937703088 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata2.00: configured for UDMA/133
ata1.00: configured for UDMA/133
usb 1-1: new full-speed USB device number 2 using xhci_hcd
i8042: No controller found
ata7: SATA link down (SStatus 0 SControl 300)
Switched to clocksource tsc
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:07: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
usb 1-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
md: faulty personality registered for level -5
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.6.0 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
device-mapper: multipath queue-length: version 0.1.0 loaded
device-mapper: multipath service-time: version 0.2.0 loaded
device-mapper: raid: Loading target version 1.5.2
device-mapper: cache-policy-mq: version 1.2.0 loaded
device-mapper: cache cleaner: version 1.0.0 loaded
AMD64 EDAC driver v3.4.0
No iBFT detected.
input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046B:FF10.0001/input/input0
hid-generic 0003:046B:FF10.0001: input: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:14.0-1/input0
input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:046B:FF10.0002/input/input1
hid-generic 0003:046B:FF10.0002: input: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:14.0-1/input1
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
GACT probability on
Mirror/redirect action on
Simple TC action Loaded
netem: version 1.3
u32 classifier
Performance counters on
Actions configured
Netfilter messages via NETLINK v0.30.
nfnl_acct: registering with nfnetlink.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ctnetlink v0.93: registering with nfnetlink.
nf_tables: (c) 2007-2009 Patrick McHardy
nf_tables_compat: (c) 2012 Pablo Neira Ayuso
xt_time: kernel timezone is -0000
ip_set: protocol 6
ipip: IPv4 over IPv4 tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
arp_tables: (C) 2002 David S. Miller
TCP: bic registered
TCP: cubic registered
TCP: westwood registered
TCP: highspeed registered
TCP: hybla registered
TCP: htcp registered
TCP: vegas registered
TCP: veno registered
TCP: scalable registered
TCP: lp registered
TCP: yeah registered
TCP: illinois registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 15
Bridge firewalling registered
Ebtables v2.0 registered
l2tp_core: L2TP core driver, V2.0
l2tp_ppp: PPPoL2TP kernel driver, V2.0
l2tp_ip: L2TP IP encapsulation support (L2TPv3)
l2tp_netlink: L2TP netlink interface
l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
8021q: 802.1Q VLAN Support v1.8
sctp: Hash tables configured (established 65536 bind 65536)
Key type dns_resolver registered
Key type ceph registered
libceph: loaded (mon/osd proto 15/24)
openvswitch: Open vSwitch switching datapath
registered taskstats version 1
bio: create slab at 1
Btrfs loaded
console [netcon0] enabled
ata3: SATA link down (SStatus 0 SControl 300)
netconsole: network logging started
rtc_cmos 00:07: setting system clock to 2016-10-26 11:45:11 UTC (1477482311)
floppy0: no floppy controllers found
scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2BB48 G201 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 937703088 512-byte logical blocks: (480 GB/447 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 4096-byte physical blocks
scsi 1:0:0:0: Direct-Access ATA INTEL SSDSC2BB48 G201 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 937703088 512-byte logical blocks: (480 GB/447 GiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2
sd 1:0:0:0: [sdb] Attached SCSI disk
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 2 and added 2 devices.
md: autorun ...
md: considering sda1 ...
md: adding sda1 ...
md: adding sdb1 ...
md: created md1
md: bind
md: bind
md: running:
md/raid1:md1: active with 2 out of 2 mirrors
created bitmap (4 pages) for device md1
md1: bitmap initialized from disk: read 1 pages, set 0 of 7123 bits
md1: detected capacity change from 0 to 477952409600
md: ... autorun DONE.
md1: unknown partition table
EXT3-fs (md1): error: couldn't mount because of unsupported optional features (240)
EXT2-fs (md1): error: couldn't mount because of unsupported optional features (240)
EXT4-fs (md1): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) readonly on device 9:1.
devtmpfs: mounted
Freeing unused kernel memory: 1068K (ffffffff82af5000 - ffffffff82c00000)
grsec: time set by /usr/lib/systemd/systemd[systemd:1] uid/euid:0/0 gid/egid:0/0, parent /[swapper/0:0] uid/euid:0/0 gid/egid:0/0
random: systemd urandom read with 38 bits of entropy available
systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Configuration file /usr/lib/systemd/system/auditd.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Starting Encrypted Volumes.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Starting Remote File Systems.
systemd[1]: Created slice Root Slice.
systemd[1]: Starting Root Slice.
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Starting LVM2 metadata daemon socket.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Starting Device-mapper event daemon FIFOs.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Starting LVM2 poll daemon socket.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Starting User and Session Slice.
systemd[1]: Created slice System Slice.
systemd[1]: Starting System Slice.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Starting Collect Read-Ahead Data...
systemd[1]: Started Replay Read-Ahead Data.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Starting system-getty.slice.
systemd-readahead[256]: Failed to create fanotify object: Function not implemented
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounted Debug File System.
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Reached target Slices.
systemd[1]: Starting Slices.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Listening on Delayed Shutdown Socket.
systemd[1]: Starting Delayed Shutdown Socket.
systemd[1]: Starting Journal Service...
systemd[1]: systemd-readahead-collect.service: main process exited, code=exited, status=1/FAILURE
systemd[1]: Started Collect Read-Ahead Data.
systemd[1]: Started Set Up Additional Binary Formats.
systemd[1]: Starting File System Check on Root Device...
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Started Load legacy module configuration.
systemd[1]: Started Load Kernel Modules.
systemd[1]: Mounting Configuration File System...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Configuration File System.
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started Journal Service.
EXT4-fs (md1): re-mounted. Opts: errors=remount-ro
systemd-journald[260]: Received request to flush runtime journal from PID 1
Adding 2096124k swap on /dev/sdb2. Priority:-1 extents:1 across:2096124k SS
Adding 2096124k swap on /dev/sda2. Priority:-2 extents:1 across:2096124k SS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
8021q: adding VLAN 0 to HW filter on device eth0
igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
random: nonblocking pool is initialized
nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
grsec: From 178.33.222.162: time set by /usr/sbin/hwclock[hwclock:654] uid/euid:0/0 gid/egid:0/0, parent /usr/bin/bash[sh:605] uid/euid:0/0 gid/egid:0/0
ip_set: protocol 6
ip_set: protocol 6